1800 429 266

CPCCDE3015 Remove friable asbestos

RTO Code: 21519

Duration:  1 day (face to face)

Aim: To provide students with the knowledge and practical skills to safely remove friable asbestos containing materials, suitable for a person or company who holds a Class A Asbestos Removal Licence.

Key Areas Covered:

  • Introduction to asbestos
  • Where asbestos is found
  • Risks of working with asbestos
  • Personal protective equipment
  • Prepare for asbestos removal
  • Prepare asbestos removal area and removal site
  • Enclose removal site
  • Carry out asbestos removal process
  • Carry out decontamination process
  • Clean up work site
    • Complete regulatory, Regulations 2017 & Compliance Codes 2019
    • Air monitoring and visual clearances
    • Workplace Procedures for removing friable asbestos
  • Waste transport and disposal

Respirators Requirement

  • A fit check is included as an assessment component of the course. Students are encouraged to  bring their own respirators to the training session; if possible.
    • One of the assessment tasks for all students attending this course is the fitting of a half face mask.
    •  It should be noted that the student will not be able to complete this course or be issued with a certificate without successfully completing this assessment task.

Prerequisites:

  • CPCCWHS1001 Prepare to work safely in the construction industry.

                              • A Red or White card is not acceptable

                              • If you hold CPCCOHS1001A, please speak to HAZCON’s Business Services Manager to discuss what RPL and Gap training options are available.

  • CPCCDE3014 Remove non-friable asbestos

                  • If you hold CPCCDE3014A, please speak to HAZCON’s Business Services Manager to discuss what RPL and Gap training options are available.

                             • A Certificate of Completion for Remove friable asbestos can be provided to student who cannot provide the original or a certified copy of the required certificate.

Learners Needs:

In order to identify individual learners' requirements please bring to our attention any candidate that has any needs such as; literacy, access or, medical restrictions so arrangements can be made prior to course
commencement.

Literacy and Numeracy Requirements:

In order to be successful in the unit, students must have sufficient English written and oral language skills to enable clear and direct communication with trainer and other students.

Students must be able to; collaborate effectively with others and complete simple written documentation and complete a multiple choice knowledge assessment.

If you have any concerns regarding this requirement please contact our friendly HAZCON training team to discuss what assisted learning options we have available to you.

Required to bring on the day:

  • Evidence of CPCCWHS1001 Prepare to work safely in the construction industry.

                          • A Red or White card is not acceptable

                          • A Certificate of Completion for Remove non-friable asbestos can be provided to student who cannot provide a certified copy of the required certificate.

  • CPCCDE3014 Remove non-friable asbestos

                          • If you hold CPCCDE3014A, please speak to HAZCON’s Business Services Manager to discuss what RPL and Gap training options are available.

  • Proof of ID (drivers’ licence or equivalent, with photo); brought to the training course.
  • Unique Student Identifier (USI) Number: refer to attached document ‘Factsheet – Student Information for the USI’, for further information on what and how to obtain a USI.
  • Half face respirator mask. Students are encouraged to bring their own respirators to the training session, as a fit check is included as an assessment component of the course.

The WorkSafe Victoria Removing Asbestos in Victoria Compliance Code section 373 states; ‘The minimum recommended RPE for this task is a non-disposable half-face respirator with a P1 filter or P2 filter.’ Appendix E of the compliance code further states; ‘Disposable half-face respirators are not recommended for ongoing asbestos removal work.

Assessment:

To be successful in this course the student must satisfactorily complete 4 assessment tasks that include a mixture of practical observations and knowledge questioning.

The students must be fit and able to carry out basic construction work involved in the removal of asbestos for the purpose of the assessments. Delivery of the knowledge questioning can be adjusted to meet the students learning needs.

If required; students are provided with two re-assessment opportunities on the day. Access to our appeals process is available in our student handbook should the student wish to consider that option if competency hasn't been achieved after two re-assessment opportunities.

Certificate:

HAZCON will issue a CPCCDE3015 Remove friable asbestos certificate and wallet card upon:

  • Successful completion of the training course.
  • Provision of identification and prerequisite documentation, as listed above.

Would you like to apply for Recognised Prior Learning (RPL)?

If you believe you have industry skills, knowledge and experience removing asbestos then you may be eligible for RPL. Please contact the Business Services Manager to discuss your suitability as an RPL candidate. The appropriate documentation will be provided if the RPL process is applicable to you.

Note:

1.       HAZCON provides realistic simulation activities to provide students with real world scenarios; however, we don't use any asbestos containing materials.

2.       All equipment required for the training course is provided.

Students are encouraged to bring their own respirators to the training session.

 

CPCCDE3015 Remove friable asbestos

 

Times: 8:30am - 4:30pm.

Cost: $370 per person **This course is GST Free (Including comprehensive course notes & catering).

DatesLocationBook
2021  

Thursday 9th December (CPCCDE3014 Remove non - friable asbestos)

Friday 10th December (CPCCDE3015 Remove friable asbestos)

Cost: $615 per person for combined course

Notting HillClosed
2022   
Tuesday, 18 January 2022Notting HillBook
Wednesday, 9 February 2022Notting HillBook
Wednesday, 9 March 2022Notting HillBook
Thursday, 7 April 2022Notting HillBook
Tuesday, 10 May 2022Notting HillBook
Tuesday, 21 June 2022Notting HillBook
Thursday, 14 July 2022Notting HillBook
Tuesday, 16 August 2022Notting HillBook
Wednesday, 28 September 2022Notting HillBook
Thursday, 20 October 2022Notting HillBook
Tuesday, 15 November 2022Notting HillBook
Thursday, 15 December 2022Notting HillBook

 

This course can also be run just for you at your workplace. If you are interested you can contact us on 1800 429 266  or via email:  training@hazcon.com.au

 

 

Latest
News

WorkSafe Amendments 2021

Posted by Andy Perry on 3 November 2021
WorkSafe Victoria has recently introduced some additional powers and infringement notices, that may range from 2 to 10 penalty units. (Penalty Unit...
 

Lock-down has changed the way we learn.

Posted by Ian Good on 12 October 2021
With the imposition of lockdowns in Victoria, businesses have had to find different ways to maintain the currency of their employees that does not ...
 
< Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next >

Safety Chat Newsletter

Training & Services Brochure

BookmarkTell a friendPrint